Cyclic Bending Test Apparatus
Application: Cyclic bending test apparatus is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. Cables bending resistance testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some rotation testing and evaluate the quality of the cable.
Specification:-
- Model No – CKINSTO-CBTA-01
- Brand – CK INSTO
- 20000 Cycles – Digital Counter meter ( -90 to +90 Deg. as one cycle)
- Two samples at a time testing arrangement.
- Load – 20, 25, 30, 50, 75, 80, 100,125,175 N (2 set )
- A fixture that bends the test sample ± 90 °
- Rate of bend 10 to 60 cycles/min (Digital meter )
- Interruption of electrical conduction shall be detected by an appropriated method, sampling rate ≤10 ms.
- Two mandrels shall be placed symmetrically to the center line which passes through the pivot
- 1 A current source
- Data logger for Real time, current and cycles
- One end of the test specimen is attached to the flexing fixture at position. Its other end is looped and fixed at position by suitable means (e.g. cable strap). The distance between clamp and coil on the cable shall be (250 ± 25) mm.
- Apparatus shale be made in M.S Material powder coted.
- Human Machine Interface (smooth Touch screen).
- Programmable logic control base.
- All data record in Pen drive
- With all safety Features
- Below is the list of bending radius required in test apparatus.
- Bend Radius in mm – 30, 35, 40 , 50 , 60, 70 , 80, 90 , 100 , 120 , 140 , 160
Standard:- ISO 19642 Part 2 Cl No. 5.3.4.3
Product Description
Application: Cyclic bending test apparatus is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. Cables bending resistance testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some rotation testing and evaluate the quality of the cable.
Specification:-
- Model No – CKINSTO-CBTA-01
- Brand – CK INSTO
- 20000 Cycles – Digital Counter meter ( -90 to +90 Deg. as one cycle)
- Two samples at a time testing arrangement.
- Load – 20, 25, 30, 50, 75, 80, 100,125,175 N (2 set )
- A fixture that bends the test sample ± 90 °
- Rate of bend 10 to 60 cycles/min (Digital meter )
- Interruption of electrical conduction shall be detected by an appropriated method, sampling rate ≤10 ms.
- Two mandrels shall be placed symmetrically to the center line which passes through the pivot
- 1 A current source
- Data logger for Real time, current and cycles
- One end of the test specimen is attached to the flexing fixture at position. Its other end is looped and fixed at position by suitable means (e.g. cable strap). The distance between clamp and coil on the cable shall be (250 ± 25) mm.
- Apparatus shale be made in M.S Material powder coted.
- Human Machine Interface (smooth Touch screen).
- Programmable logic control base.
- All data record in Pen drive
- With all safety Features
- Below is the list of bending radius required in test apparatus.
- Bend Radius in mm – 30, 35, 40 , 50 , 60, 70 , 80, 90 , 100 , 120 , 140 , 160
Standard:- ISO 19642 Part 2 Cl No. 5.3.4.3
